To connect your Plantronics headset to your computer

• How To Connect Poly Headset To Computer – Make sure the headset is turned on and connected properly.
• See the user manual for instructions on how to put the headset in connection mode. On your computer, go to Bluetooth settings.
• The exact steps will vary depending on your operating system, but you can check the Bluetooth information from your system or dashboard.
• In the Bluetooth settings, select the option to create a new Bluetooth connection. Your computer should recognize your Plantronics headset and display it as an available device.
• Select the headset from the list to connect to your computer.
• When prompted, enter the password or PIN for the headset, preferably 0000 or 1234, to complete the linking process.
• Once paired, it should automatically connect to your computer if the headset is on and in range.
• You will need to enable the Plantronics sound system in your computer’s sound settings. To read more solutions about PC visit PC information

How to Sync Plantronics Headset:

Pairing Plantronics headsets with mobile devices such as handheld devices and tablets is possible using Bluetooth. Follow these steps:

1. Charge your headset. Make sure your devices are charged before pairing them. Depending on the type of headset you have, the indicator light should be solid when fully charged but not in use. The display may turn off completely after 15 seconds, depending on the Plantronics model.

1. Turn your headset on. There are many ways to activate Plantronics devices. All require pressing the power button and are easy to set up. Turn, push, or switch the power button to the ON position.
2. Put your headset into pairing mode. How the pairing mode is activated depends on the headset model. For example:
3. If the headset has a multifunction switch, flip it off, then press and keep it for five seconds until the light begins flashing.
4. If the headset has a strength button, hold the decision button for five to six seconds till the mild begins to flash.
5. In models with ON and OFF buttons, the light will start flashing while the charger is disconnected. Press and keep the energy button for five seconds.
6. Turn on Bluetooth on your pc or other device. Connect on your computer, telephone, pill, or other tool. When the device is ready to pair, it’s going to apprehend your Plantronics headset.
   Select the Plantronics headset to pair. Depending on the tool, you can want to go into a code. Enter 0000 (4 zeros) whilst prompted. Once connected, you could listen to songs, make calls, and do more together with your new tool.

   Conclusion

   • 

   Connect the BT600 USB dongle to the pc.
   Turn on the Poly headset.
   If the dongle is still related to your pc, press the small brown button at the top of the BT600 USB dongle.
   The USB light flashes crimson and blue.
   Press the Bluetooth button on the headset to go into pairing mode.
   The dongle will flash, and pair, after which it emerges as stable. Now the headset is effectively connected to the USB dongle.